---
title: "Havnby FlatCore Solo Model Y Review 2026 — Specs, Fit & Gaps"
canonical: "https://teslamattress.com/reviews/havnby-solo"
markdown_url: "https://teslamattress.com/reviews/havnby-solo.md"
language: "en"
author: "Fredrik Mastouri"
checked: "not-provided"
content_updated: "2026-08-25"
evidence_scope: "secondary-research-summary"
source_scope: "visible page heading, answer and main content"
---

# Havnby FlatCore Hybrid Support Mattress for Tesla Model Y — Solo Edition Review

FlatCore Solo: a 193 × 80 × 17 cm one-person foam-and-air mattress for Model Y. Evidence is limited to official Havnby material checked 19 August 2026; no score or hands-on result is assigned.

Primary sources checked

## What the evidence can prove: Secondary research — no score assigned

Seller listing for live verification: August 19, 2026

Official data establishes the one-person width, two Model Y year choices, listed weight, 12V setup and package contents. It does not establish comfort, side-sleeping pressure relief or how much usable gear volume remains beside the pad. The structured specification lists a total height of 6.7 inches, while a later copied highlight says “7.5-inch foam.” The measurable product table should control, and the later statement should be treated as an unresolved seller-page conflict. Havnby does not publish maximum supported weight The official store’s review count, where present, may span vehicle variants and is not treated as Tesla-specific fit evidence.

[Official FlatCore Solo listing](https://havnby.com/products/flatcore-hybrid-support-mattress-for-tesla-model-y-solo-edition) · [Havnby warranty terms](https://havnby.com/pages/warranty) · [Havnby return and 60-day trial terms](https://havnby.com/pages/returns-policy)

Seller specifications and hosted reviews can change. We identify missing evidence rather than converting product claims into test results.

[how we review Tesla mattresses →](/methodology)

Quick take **Secondary research — no score assigned**

FlatCore Solo is Havnby’s narrow Model Y option for one sleeper and a parallel gear lane, but its 80 cm width, missing load rating and contradictory 6.7-versus-7.5-inch height language need to be explicit. Havnby listed it at $399 when checked 19 August 2026. Havnby does not publish maximum supported weight

Price and next step

## Check Havnby’s price and terms

Havnby controls live pricing, availability and checkout terms. Confirm the exact vehicle option and final total before paying.

Cart-verified August 19, 2026: code AWD cut a Havnby cart by 10%. That check ran on the FlatCore Hybrid Support Mattress for Tesla Model Y listing, not this product. The live cart is final.

We may earn a commission through links on this page [Affiliate disclosure](/disclosure)

[See Havnby price and terms →](/discounts/havnby)

[Discounts →](/discounts)

Practical ownership review

## Six checks before you buy

a 193 × 80 × 17 cm one-person foam-and-air mattress for Model Y Official data establishes the one-person width, two Model Y year choices, listed weight, 12V setup and package contents. It does not establish comfort, side-sleeping pressure relief or how much usable gear volume remains beside the pad. The record separates those published facts from fit, comfort and durability outcomes that have not been independently established.

1. 01 **Packing and cargo space** Havnby lists a 3.29 kg product and a 72 × 34 cm stored measurement with no third dimension. The bag, sheet and powered deflation are included, but packed volume is unavailable. Havnby does not publish the third bag dimension, packed volume or the width of the remaining Model Y gear lane.
2. 02 **Fabric, foam and build quality** FlatCore Solo uses the same general foam-and-air idea as the full-width FlatCore, but narrows the sleeping surface to 31.5 inches so part of the cargo floor remains open. Havnby describes a soft-touch 30D TPU surface and foam-backed support. Havnby does not publish foam density, layer thicknesses or full fabric composition.
3. 03 **Pump, power and setup** The built-in 12V ABS pump is listed at 50 seconds to inflate and 60 seconds to deflate. The product requires the vehicle outlet during both powered steps; pump pressure and power draw are not stated. Havnby does not publish pump pressure, cable length, current draw or manual backup instructions.
4. 04 **Sleep quality and support** The official 193 × 80 cm surface is long enough on paper for many adults but intentionally narrow. The stated maximum product height is 17 cm in the specification table. Havnby does not publish a load limit, usable shoulder width by body position, insulation value or overnight air-retention result.
5. 05 **Cleaning, moisture and storage** A custom sheet is included, but Havnby does not publish a complete wash method, temperature, dryer guidance or mattress-surface care procedure on this listing. Care guidance from another Havnby model should not be transferred to this product unless the delivered label or manual says so.
6. 06 **What remains unresolved** The 31.5-inch width is substantially narrower than the full-width Havnby options; No maximum-load figure is published; The main specification says 6.7 inches while a later section says 7.5-inch foam

Manufacturer evidence

## Official FlatCore Solo product views

These three images come from Havnby’s product gallery. They document the listed product and intended placement; they do not establish comfort, long-term air retention or exact fit in every vehicle.

Editorial overview assembled from the three Havnby-supplied photographs below; no product geometry was generated or altered.

Official image showing the one-person lane beside open cargo space.

Manufacturer image showing powered setup access.

Official material close-up; it does not disclose foam density.

## Decision summary

FlatCore Solo is Havnby’s narrow Model Y option for one sleeper and a parallel gear lane, but its 80 cm width, missing load rating and contradictory 6.7-versus-7.5-inch height language need to be explicit.

This is a secondary-research review based only on Havnby’s official product page, official product data, warranty terms and return terms checked on **19 August 2026**. No hands-on fit, comfort, noise, pressure-retention or setup test was performed for this assessment. Dimensions, timings, capacity and material descriptions below are seller-published figures, not independent measurements.

At the source check, the USD storefront showed both Model Y year ranges available at $399. The product feed records a publication date of 3 November 2025. The price is a dated observation, not a promise of today’s total; confirm the exact vehicle option and final amount before paying.

## Exact Tesla fit and product identity

The seller provides Model Y 2020–2024 and Model Y 2025–2026 choices. No other Tesla model and no Model Y L choice is listed.

Both Model Y year ranges use the same Solo SKU. Havnby describes the product as vehicle-shaped, but does not publish a different measurement or cut diagram for the two selections.

| Specification | Official Havnby record checked 19 August 2026 |
| --- | --- |
| Observed price and status | $399; available on 19 August 2026 |
| Tesla fit | Model Y 2020–2024 or Model Y 2025–2026 |
| Size | 76 × 31.5 × 6.7 in / 1930 × 800 × 170 mm |
| Weight | 7.3 lb / 3.29 kg |
| Storage size | 28.3 × 13.4 in / 720 × 340 mm; third dimension not listed |
| Inflation / deflation | 50 / 60 seconds, seller figures |
| Pump | Built-in 12V ABS pump |
| Maximum load | Not published |
| Material | Water-resistant 30D TPU and unspecified foam-backed support |
| Included | Mattress, bag, custom sheet, manual and two eye masks |
## Construction and setup

FlatCore Solo uses the same general foam-and-air idea as the full-width FlatCore, but narrows the sleeping surface to 31.5 inches so part of the cargo floor remains open. Havnby describes a soft-touch 30D TPU surface and foam-backed support.

The built-in 12V ABS pump is listed at 50 seconds to inflate and 60 seconds to deflate. The product requires the vehicle outlet during both powered steps; pump pressure and power draw are not stated.

Havnby lists a 3.29 kg product and a 72 × 34 cm stored measurement with no third dimension. The bag, sheet and powered deflation are included, but packed volume is unavailable.

## What the official evidence supports

Official data establishes the one-person width, two Model Y year choices, listed weight, 12V setup and package contents. It does not establish comfort, side-sleeping pressure relief or how much usable gear volume remains beside the pad.

The official record supports the following practical strengths:

- 80 cm width intentionally leaves a parallel cargo lane
- Separate Model Y 2020–2024 and 2025–2026 selections
- Seller-listed 3.29 kg mattress weight
- Built-in 12V pump with shorter listed times than full FlatCore
- Custom sheet, bag and two eye masks included

## What remains unknown or internally inconsistent

A trustworthy decision also requires the missing data to remain visible. The current Havnby material does not close these gaps:

- Havnby does not publish maximum supported weight
- Havnby does not publish foam density and individual layer thicknesses
- Havnby does not publish the third packed dimension and reproducible bag volume
- Havnby does not publish variant-specific geometry for the two Model Y year ranges

The structured specification lists a total height of 6.7 inches, while a later copied highlight says “7.5-inch foam.” The measurable product table should control, and the later statement should be treated as an unresolved seller-page conflict.

### Documented strengths

- 80 cm width intentionally leaves a parallel cargo lane
- Separate Model Y 2020–2024 and 2025–2026 selections
- Seller-listed 3.29 kg mattress weight
- Built-in 12V pump with shorter listed times than full FlatCore
- Custom sheet, bag and two eye masks included

### Concrete tradeoffs

- The 31.5-inch width is substantially narrower than the full-width Havnby options
- No maximum-load figure is published
- The main specification says 6.7 inches while a later section says 7.5-inch foam
- The product feed stores a $379 compare-at value below the current $399 price

## Ownership terms, care and storage

Havnby’s current warranty page states that eligible purchases made on or after 1 June 2026 receive a three-year limited warranty for manufacturing and quality-related defects under normal use. Punctures, cuts, misuse, normal wear, unauthorised changes and second-hand purchases are excluded. That is a limited defect warranty, not a promise about personal comfort or vehicle fit.

Havnby’s return page states a 60-day sleep trial from delivery. For a non-quality return, the customer pays return shipping and original shipping charges are not refunded. The current policy also lists possible condition fees of $15 for an opened clean item and $30 when visible staining, soiling or cleaning is required. Those terms should be checked again before ordering.

A custom sheet is included, but Havnby does not publish a complete wash method, temperature, dryer guidance or mattress-surface care procedure on this listing.

## Who should consider it?

Consider Solo when one person wants a full-length Model Y sleep lane without covering the entire cargo floor and accepts an 80 cm sleeping width.

## Who should not buy it?

Skip it for two sleepers, for anyone who needs a published load rating, for other Tesla models, or when a wider turning area matters more than keeping gear beside the mattress.

The nearest in-site alternatives are:

- [Havnby FlatCore Model Y](/reviews/havnby-autolevel) — uses the full 132 cm width and publishes a 300 kg load figure
- [Havnby CloudCore](/reviews/havnby-cloudcore) — offers a lower full-width surface and more Tesla model choices
- [Havnby FlatCore Front Seat](/reviews/havnby-flatcore-front-seat) — creates a separate child-sized rest area while leaving the rear cargo zone available

## FAQ

### How wide is FlatCore Solo?

Havnby lists 31.5 inches / 80 cm.

### Does it fit the 2025 Model Y?

The seller provides a 2025–2026 selection, but publishes no variant-specific measurement.

### What is its weight limit?

Havnby does not publish a maximum-load figure on the current product page.

### Is it 6.7 or 7.5 inches high?

The specification table says 6.7 inches total. A later 7.5-inch foam statement conflicts with that figure and should not be repeated as settled fact.

## Bottom line

FlatCore Solo has a clear functional reason to exist: a one-person lane beside stored equipment. Its narrow width and the missing load and material data matter more than broad comfort language.

Source facts were checked against the [official Havnby product listing](https://havnby.com/products/flatcore-hybrid-support-mattress-for-tesla-model-y-solo-edition), the [current warranty policy](https://havnby.com/pages/warranty) and the [current return policy](https://havnby.com/pages/returns-policy) on 19 August 2026. Unpublished specifications remain unpublished here; seller claims are not converted into test results, scores or owner-sentiment percentages.

Relevant next steps

## Compare before you buy

[Documented alternative **Havnby FlatCore Model Y** uses the full 132 cm width and publishes a 300 kg load figure](/reviews/havnby-autolevel) · [Documented alternative **Havnby CloudCore** offers a lower full-width surface and more Tesla model choices](/reviews/havnby-cloudcore) · [Documented alternative **Havnby FlatCore Front Seat** creates a separate child-sized rest area while leaving the rear cargo zone available](/reviews/havnby-flatcore-front-seat)

Researched by Fredrik Mastouri · current specifications checked against the linked manufacturer sources; owner-feedback claims are attributed where used. Methodology: [how we review Tesla mattresses](/methodology). Page revised 2026-08-25; live prices, stock and terms can change. See our [Affiliate disclosure](/disclosure).

Page last revised: August 25, 2026